This content is intended for general information. The application must be carried out by means of equipment manufacturer instructions, the risk assessment specific to the business and the energy control procedure prepared by authorized persons.
Why do we need a special choice?
The danger in pressure gas pipes is not just the movement of the valve hand; high pressure, fluidity, rotation and gas remaining within the line should be assessed together.
Data for the product selection
The valve protective cabin, the regulator connection, the diameter of the valve head and the tube output direction are measured. LP-Q31 type cylinder valve lock products are the first candidate for some geometries; real compatibility must be verified in the field.
| Measurement | Control |
|---|---|
| The Vana Head | The lock |
| The protective cabin | access to assembly |
| The outlet | Risk of closure and collapse |
| Type of gas | Material and discharge procedure |
Order of Application
- Fix the tube in a straight position and against turning.
- Stop the process and close the main tube valve.
- If appropriate, put the valve lock in consideration of the regulator and connection geometry.
- Apply personal lock and read label.
- Take the gas on the line to a secure point in accordance with the procedure and verify pressure-free.
Frequent mistakes
- Working without fixing the tube
- Discharge burning or toxic gas in an unsuitable place
- The regulator button is the main valve.
- allowing the lock body to break the wire
What should be sent to match the offer or product?
The brand-model of the equipment must be sent together, general and close plan photos in a safe state, millimeter measurements, energy type, number of people to work at the same time, and the usage environment. This information reduces the risk of choosing product code according to its appearance alone.
Share your photos and sizes; let us evaluate the product, procedure, training and simulator needs together.